i've also found my windows 98 se + sp2 disc (lol.) & a series of winlited xp installation discs intended specifically for this pIII. the most recent one will be in the drive when i turn it on.

i'm probably going to want to build a new winlited xp installation disc from scratch, we'll see.

so, i've rebuilt the hardware in the machine, at least.

but i don't have the iso i was looking for...

i was able to find an iso at archive.org. we'll have to see if it works or not.

i may otherwise be stuck trying to find the 16-bit drivers and software for the device. i at least seem to have a useful user manual that will remind me of what i'm looking for and ought to have.

so, i'm making some fruit and will get back to it afterwards.

hey, if it works on both partitions then great.

i may have an iso of it on my storage drive.

if i still have that pile of old install discs, i don't know where it is.

i think i left it outside my door once in the old apartment, with the intent to put it away in storage when i got around to it, and the retard upstairs decided it was garbage.

fucking retards. they ruin everything.

i actually have two legacy soundblaster cards, and i kind of had them installed in a foolish way, because i was splitting the functionality of the machines off pretty strictly.

so, i put the older live! card in the recording machine because i wanted to connect it to the bay in the front. then, i put the newer audigy in the older machine, to use it as a media pc in the living room.

but, i really want the audigy in the newer 32-bit box and the live drive! in the 16-bit environment.

i'll have to find the old disc if i even still have it, but the problem might have been that they sold me a demo with reduced functionality....so i had to load the install from the disc, and the setup file wouldn't launch in the 32-bit environment.

there are other reasons why i want a 16-bit system besides this, so trying to force the eax to work in a 32-bit system is missing the point.

the eax + the live drive meant i could plug my guitar into the device and use it as a real time reverb processor, which is something i haven't been able to emulate since.

but, the audigy can also connect to a front end, and i should probably see if i can find something cheap on ebay. one thing at a time; i need some furniture for in the other room and haven't heard anything back yet.

i need this, too, to make sure i get the connections right. 

https://drive.google.com/file/d/1Q8aZAvX24IRDNLTL2i8at3-6HSz6QSZg/view?usp=sharing

did i always have it set to condenser mic? it might explain why the audio in was often less than stellar. lol.

there's a jumper to trigger it for use with an actual 1/4" microphone. that's been set, now - maybe for the first time. rtfm, right?

but, this is what i wanted, and isn't in the manual. i'm going to archive it here in case i need to find it later, and that page (dated to  2005-06-16, 14:32) disappears. but, it turns out that there's not much of use here.

JP2 - When jumpered, connects SPDIFIN#1 from a cascaded Digital I/O Card to the AUD_EXT header (back to the Live! card).

JP3 - When jumpered to DD (default), connects SPDIFIN#2 from the Live! Drive's Digital DIN header to the AUD_EXT header. When jumpered to CDB, connects SPDIFIN#2 from the cascaded Digital I/O Card's Digital DIN header to the AUD_EXT header. (I'm not aware of anything that even uses this input...)

JP4 - When jumpered to OUT0, sends the SPDIFO#0 signal (front-channels) to the CS8414 CODEC for the headphone output. When jumpered to OUT2, sends the SPDIFO#2 signal (front and rear channel mix) to the CS8414 CODEC for headphone output (default).

JP6 - The default position on my Live! Drive was to OPT/P_IN, which routes the incoming coax S/PDIF signal to SPDIFIN#1 on the AUD_EXT header. Moving the jumper to the RCA_IN position sends that signal instead. The RCA_IN signal appears to come from the CT4861 riser card, which hosts the optical S/PDIF and AUX I/O, and is found on the Live! Drive II.

for now:

https://www.vogons.org/viewtopic.php?t=40230

this device actually has a very powerful dsp in it, that i could never get to work with a 32 bit os. virtual machines didn't work right - and this is relatively complex, on an old processor. i kind of gave up on it because you just can't put windows 98 on the internet, and you have to conniect to the internet. right?

but, access to that dsp is actually sort of fundamental to completing unfinished work that was left incomplete and started over a certain period of time.

at this point, the device is essentially useless to connect to the internet with, anyways. so, i'd might as well put 98 on it and just leave it offline. 

i'm actually going to dual boot it with a winlited 32-bit xp install that i built as a glorified type writer for that machine specifically, if i can find it. that way, i've got access to a basic xp typing environment as an absolute backup, in addition to regaining full access to the hardware. so, i should be able to access this machine in both 16-bit and 32-bit windows environments.

it's a somewhat unusual but actually very functional project that i don't expect to take so long. uch-o.

it's been so long that i needed to download the user manual:

https://drive.google.com/file/d/1Vo0H6V0-PhGen--eatQtiegDfTFpiiUC/view?usp=sharing

i'll leave that there for now, given that i'm on this chromebook, and it will wipe in time.

so, i think i have an answer for the bookshelves figured out, and it's nice and easy. i also might have an upgrade for the rickety headboard i've been improvising for too long, now - but that's tentative. one thing at  a time...

that would be all of the furniture required for the bedroom, for now.

i'm also toying with getting a big bookshelf from ikea to cover over the sliding doors in here. i know you haven't seen pictures, yet.

i've decided what i want to put into the 16-bit machine as well, based on what was in there previously. when this was a production machine, it had a regular cd drive and a cd burner - not dvds, cds. i replaced the cd reader with a dvd reader when it broke, and bought a dvd-writer for it in 2006 to replace the cd-writer, which ended up in the other machine when this one was converted into a media playback centre. so, to reconstruct the spirit of the initial machine, the three slots should be a dvd-writer on top, a dvd player below and the sb! live drive! card on the bottom. ok....

i need a nap.

unfortunately.